Skip to content
Bayshore Estates Lock ServicesRequest a visit
Open 24/7(249) 800-5180Call now
Technician in a cap and glasses holding a small key fob beside the dashboard of a black motorcycle in a garage.

Locksmith · Barrie

Our advice corner

The advice here is the kind you would get from a friend in the trade over a kitchen table: what matters, what does not, what to do about it. Locks for homes, keys for cars, hardware for businesses, and the sensible habits that keep all of them working.

Call now · open 24/7(249) 800-5180

Request a visit

Asked and answered

Person holding a removed black lock assembly beside a partly open brown front door with a long black pull handle. — Home Lockout Service, Barrie

Lockout Services

Can you get me in if my smart lock has died?

Yes, usually. Backup access on a keypad or app-controlled deadbolt depends on the model. Many carry small external terminals that wake the lock when a fresh nine-volt battery is touched to them, long enough to enter your code; some also keep a conventional keyed override behind a cover, which a locksmith can pick or decode like any other cylinder, while other current models have no cylinder at all and rely only on their own recovery method. Once inside, the batteries are replaced and your codes are checked. Home Lockout Service

Do you work with our alarm company and access-control provider?

Yes, and it makes the visit smoother. The alarm station is told an entry is expected and the authorised person handles the disarm and password. For access control, the provider can often confirm the controller's status, unlock a magnetic lock remotely, or re-enrol fobs once you are inside, while the locksmith handles the mechanical side and the override cylinder. Nobody's wiring is cut; each party does the part it is set up to do. Business Lockout Service

It broke while I was locking up and now the door is open. What should I do?

Stay with the door if you can, or ask a neighbour to keep an eye on it, and call. When the locksmith arrives the fragment is removed and securing the door comes ahead of everything else, so you can leave. If the cylinder needs more than a clean, a replacement goes on during that visit rather than leaving the door on a latch overnight. Broken Key Extraction

How long does a break-in repair take?

It depends on how much gave way. A new lockset and a reinforced strike on a sound frame is a modest job. Bonding a split jamb, sleeving a crushed door edge, reinforcing the hinges and rekeying several cylinders takes longer, and a shattered frame means a securing visit now and a second visit after the carpenter. The locksmith gives a sense of the time once the damage has been seen, and the opening is secured before leaving even when a part has to be ordered. Break-In Damage Lock Repair

Hands holding a lock cylinder and a ring of keys above a worn workbench with another cylinder and loose keys. — Lock Rekeying, Barrie

Change or Rekey Locks

My keys were lost with something showing my address. Is rekeying enough?

Rekeying is exactly the right response, because it makes the lost key useless at every door that was pinned. The locksmith will walk the property with you to be sure nothing is missed, including the garage side door, a shed and any padlock the same key opened, and will suggest changing any garage keypad code that was written on the same ring. After that, whoever finds the keys is holding brass that opens nothing on your property. Lock Rekeying

Can a deadbolt be added to a door that only has a knob?

Yes, on nearly any wood, steel-clad or fibreglass entry door. The locksmith marks a spot above the knob, clamps a jig to the door and bores a cross hole through the face and a smaller hole through the edge, then cuts a pocket and fits a strike on the frame. The main things checked first are the door's thickness, what is inside it at that height and whether glass sits close by. Deadbolt Installation

What does a higher grade of lock actually give me?

Grades follow ANSI/BHMA standards, with Grade 1 the highest and Grade 3 the lightest, and residential hardware carries a separate label that scores security, durability and finish. The grade reports how the lock performed on the standard's own operational, strength and security tests; a higher grade often comes with a longer bolt, a sturdier housing, pins that resist picking and a strike built to anchor into the framing, but those features are worth confirming on the specific model rather than assumed from the grade alone. Lock Replacement & Upgrade

Why does my knob turn without moving the latch?

Most often the square hole in the hub inside the case has rounded with age, or the spindle has worn, so the knob turns a good way before it grips. Loose knob set screws produce the same slack. Less often a latch spring has broken and the latch is simply sitting inside the door. All of these are corrected during service by replacing the spindle and screws, bushing or replacing the hub, or fitting a new spring. Vintage Mortise Lock Service

Small dark safe with a combination dial on a wooden desk beside a closed laptop and books. — Safe Opening & Combination Change, Barrie

High Security Locks

Can several employees each get their own code once the safe is open?

Many electronic locks support more than one user code, so a manager and one or more backup employees can each be set up separately during the same visit rather than sharing a single combination. A mechanical dial only holds one combination at a time, so multiple access there means agreeing who holds it and how that changes when staff do. Safe Opening & Combination Change

How do I prepare the room before a servicing visit?

Clearing a working space in front of the safe, moving anything stacked against or on top of it, and having a rough idea of when it was last serviced all help the visit start smoothly. If the combination or code is still known, having it on hand avoids needing to open the unit by other means first. Nothing more elaborate than that is generally needed beforehand. Safe Installation & Servicing

Are high security locks only for businesses?

Not at all. Homes are the most common place they are fitted, especially after a move, a break-in nearby, or the realisation that too many keys have been handed out over the years. A graded deadbolt with a patented cylinder and a reinforced strike is a modest, quiet upgrade for a front or side door. Businesses tend to go further, with laboratory-rated cylinders, heavy lock bodies and a documented key system across many doors. High Security Locks

Person handling a lock cylinder at a workbench lined with cylinders, keys, small pin trays and blank key tags. — Commercial Rekeying, Barrie

Commercial Locks

How do you confirm I am allowed to have the locks changed?

For a business the locksmith looks for someone with standing: the owner, a director, or a manager who can show written authority from one of them. A lease, a business registration or a letter on company paper usually settles it, along with photo identification. Where doors belong to a landlord, the property manager's approval is asked for as well. This is a short step and it protects the business from having its own locks changed by the wrong person. Commercial Rekeying

What records should I keep once the system is installed?

The keying chart itself, a log of which key or fob was issued to which person or role, and receipts signed when keys change hands. Together these let the business answer, at any point, who currently holds which level and when it was issued, rather than relying on memory once the locksmith who built the system is no longer involved. Master Key System Design

Can the system be expanded to more doors later?

Yes. A system installed with some spare capacity in its controller and power supply can usually take another door or two by adding a reader and lock and wiring it back in. A door far from the existing wiring can instead run its own standalone unit. Either way, existing schedules and credentials do not need to be rebuilt from scratch. Access Control Installation

Can the door be alarmed without making it hard to open?

Yes. An exit alarm module sounds when the device is used, which tells staff a door meant to stay closed has been opened, but it does not add any resistance to the push that releases the latch. The alarm is a notification layer on top of hardware that still opens under one motion, which is why it suits stockroom, dock or perimeter doors where entry through that opening should be rare. Panic & Exit Hardware

Two adults discussing a key fob beside a parked car. — Car Lockout Service, Barrie

Car Keys

I have lost my only key. Can a locksmith make a new one at the roadside?

For most cars, yes. After the car is opened, the door cylinder is decoded to read the cuts, or the key code is drawn from the vehicle records against your proof of ownership, and a blade is cut in the van. A transponder key or fob is then programmed through the diagnostic port so the engine will start. Some newer or high-security models need dealer-only parts; you are told that up front rather than after. Car Lockout Service

Can the key I lost still start my car?

Until it is erased, yes, because the immobilizer still recognizes its chip. During the programming session the locksmith can remove every key from the car's memory except the ones in your hand, and unpair the old remote as well. After that the lost key is a blade that opens a door at most, and nothing else. If that blade worries you, changing or rekeying every mechanical cylinder it operates, doors and ignition, plus a trunk, tailgate, fuel door or glovebox where the car has one, finishes the job. Car Key Replacement

Does cold weather affect a key fob?

Yes, in a couple of small ways. Battery performance drops in cold temperatures, so a fob that already had a fading battery is more likely to act up on a cold morning, and a proximity system's range can feel shorter in the cold as well. Testing a spare's battery before winter, and keeping a spare battery on hand, avoids being caught out by either. Spare Car Key Duplication

If I lose a fob, will whoever finds it still be able to use my car?

Yes, until that fob's electronic authorization is specifically removed following that vehicle's procedure, which is why reporting a lost fob matters even when a spare already covers the gap at home. On many vehicles the removal touches only that one fob and leaves the rest working as before; on others every credential is relearned as part of the same procedure. A mechanical blade built into the lost fob can still open an unchanged door lock until that lock is separately rekeyed. Key Fob Programming

Open 24/7

Request a visit

Let's sort out your door.

Call now · open 24/7(249) 800-5180
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 18 years in business