Skip to content
Bayshore Estates Lock ServicesRequest a visit
Open 24/7(249) 800-5180Call now
Person touching the sliding metal bolt on a wooden garden gate. — Gate & Building Entry Locks, Barrie

Change or rekey · Barrie

Gate & Building Entry Locks

The padlock on the side gate has gone stiff every winter for three years running, and this year the key simply will not turn past the first few pins. Salt spray off the road and a season of meltwater have left the cylinder pitted and reluctant.

Call now · open 24/7(249) 800-5180

Request a visit

In plain words

A property that grew its gates one at a time, a shed lock here, a side gate there, tends to end up with a drawer full of keys that only sort of match. This service takes stock of every gate and padlock on the property and works out which ones can reasonably be brought onto a single key, replacing or recombining cylinders as needed. The owner leaves with fewer keys, a clear note of what opens what, and a plan for adding any new gate onto the same system later.

Sound familiar?

The padlock on the side gate has gone stiff every winter for three years running, and this year the key simply will not turn past the first few pins. Salt spray off the road and a season of meltwater have left the cylinder pitted and reluctant.

How the visit goes

Gate & Building Entry Locks · Barrie

How the visit goes

Disassembled brass and steel lock cylinder parts laid on a gray metal surface with small brass pins, springs and tweezers.
  1. 1

    Reading a frost-heaved or settled post

    Ground movement shows up as a lock problem long before anyone thinks to blame the post. The locksmith checks whether the gate post has lifted, tilted or settled relative to the latch post it is supposed to line up with, and by how much, since a small seasonal shift is different from a post that has genuinely moved for good. This distinction decides whether the fix is resetting the strike position for now or addressing the post itself, and it keeps the same misalignment from returning with the next frost.

  2. 2

    Correcting a frost-heaved or leaning post

    When ground movement is the real cause, the fix goes to the post rather than the lock. Depending on what the post is set in, this can mean resetting it plumb, packing or replacing the base it sits in, or adding bracing so it stops drifting with each freeze-thaw cycle. The strike is then repositioned to match the corrected post, and the gate is cycled through several full closes to confirm the latch now meets it consistently, in place of chasing the same misalignment again after the next frost.

  3. 3

    Nothing left half-finished after a break-in attempt

    Where the visit followed prying, cutting or an attempted entry, you leave with every damaged piece accounted for: what was replaced, what was straightened, and what was simply cleaned up and reused because it tested sound. The gate or door is shown closing, latching and locking normally, and any weak point the attempt revealed, such as an undersized hasp or a strike with too little bite, has been addressed rather than left as it was found.

In the van

  • Voltage tester for electric strikes
  • Dry graphite or PTFE lubricant
  • Key blanks and code cutter
  • Gate locks and latches
  • Corrosion-resistant fasteners

What affects the quote

  1. 1

    Corrosion or damage already present

    A cylinder that is merely stiff is a lighter job than one that is visibly pitted, seized or cracked from years of weather exposure, and the quote reflects whichever condition the hardware is actually found in.

  2. 2

    Weather-rated versus standard hardware

    Hardware built and sealed for outdoor exposure differs from standard indoor-grade hardware, and choosing the weather-rated option for anything mounted outside is reflected in the parts portion of the quote.

  3. 3

    Any upgrade chosen while the locksmith is already there

    Some property owners use the visit to move to a heavier closer, an electric strike, a master key system or additional padlocks for other gates. None of this is required to address the original problem; each option is priced as a separate line.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(249) 800-5180

Gate & Building Entry Locks: questions

Advice · (249) 800-5180

Why does my gate lock stick every winter?

The usual cause is meltwater getting into the keyway during a thaw and refreezing overnight, which stiffens the plug or blocks it outright, along with cold thickening any grease left inside from the factory. Road salt tracked onto ground-level hardware adds corrosion on top of that. A cylinder treated with the lubricant its maker specifies, kept clear of standing water, generally handles a winter far better than one left as it came, and a weather-rated replacement, kept up the same way, holds up better once the current one is pitted.

What should I have ready before the locksmith arrives?

It helps to know which gate or door is affected, roughly how old the lock or closer is, and what exactly is happening: dragging, slamming, refusing a key, or a buzzer that stopped releasing the door. If the entry is shared, a rough idea of how many households or units currently need a working key speeds up the visit considerably. For a building entry, having contact information for a property manager or condo board on hand is useful if a decision needs their sign-off.

What information over the phone helps identify the hardware before the visit?

A photo of the lock, the gate or the entry door, taken from a few steps back and up close on the cylinder, tells the locksmith more than a verbal description usually can. Mentioning whether the gate is wood, metal or vinyl, roughly how the property is laid out, and whether the entry has any buzzer, keypad or electric component narrows down what hardware and parts to bring. None of this is required, but it does shape what shows up in the van.

Gate & Building Entry Locks near you

Simcoe, Ontario

Barrie information

Town
Barrie, Simcoe, Ontario
In business
18 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

29%

Newer homes. About 29% of homes in Barrie were built in 1980 or earlier, according to the 2021 Census.

Households in newer homes are often keen on keypads, fobs and phone-controlled locks. Standard doors make installation straightforward, and the locksmith spends more of the visit setting codes and pairing devices than on carpentry.

58%

A mix of homes. Single-detached houses make up about 58% of homes in Barrie (2021 Census).

In a mixed area, a locksmith's advice bends to the building. For a house, the side door and garage entry get attention. For an apartment, the suite door's closer, strike and viewer do. The principle is the same: look at how the door is actually used.

Source: Statistics Canada, 2021 Census of Population

Open Barrie in Google Maps

Open 24/7

Request a visit

The padlock on the side gate has gone stiff every winter for three years running, and this year the key simply will not turn past the first few pins.

Call now · open 24/7(249) 800-5180
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 18 years in business