Skip to content
Bayshore Estates Lock ServicesRequest a visit
Open 24/7(249) 800-5180Call now
Detached cylindrical lock housing and black-headed key on an automotive workbench. — Ignition Lock Repair, Barrie

Car keys · Barrie

Ignition Lock Repair

Turning the key used to take one smooth motion. Lately it grinds partway through, sometimes needing a second attempt, and yesterday it stopped reaching start altogether.

Call now · open 24/7(249) 800-5180

Request a visit

In plain words

A key that has snapped off inside the ignition barrel is not the end of the key, or of the barrel. The broken piece is drawn out with hooked or spiral tools built for the job, without pushing it further in, and the cylinder is checked afterward for the wear that likely caused the break in the first place. A fresh key is then cut and tested before the visit ends.

Sound familiar?

The car arrived with one worn-looking key and a story about a lost spare. It turns the ignition, eventually, after some patience and a particular angle nobody in the household can quite describe or repeat on the first try.

How the visit goes

Ignition Lock Repair · Barrie

How the visit goes

Disassembled brass and steel lock cylinder parts laid on a gray metal surface with small brass pins, springs and tweezers.
  1. 1

    Checking the switch positions and the steering lock

    Behind the part of the ignition a key touches sits an electrical switch with its own positions, off, accessory, on and start, and a mechanical steering lock that engages when the key is removed. The locksmith checks how the barrel behaves at each stop: whether it reaches start cleanly, whether the wheel locks and releases as it should, and whether the transition back to accessory is smooth. A fault confined to one position often narrows the cause before any part comes off the vehicle.

  2. 2

    Repinning the cylinder to the current key

    When the barrel itself needs to come out, it is removed from the housing and its wafers are reset to match the key already in use, following that vehicle's own service procedure rather than a generic pin-and-follower method. Reassembled and tested through every position, the repaired cylinder answers to the same key that opened the door on the way to the vehicle, so nothing else in the owner's pocket needs to change.

  3. 3

    A key that runs through every position smoothly

    The visit ends with the ignition cycling cleanly from off through accessory, on and start, and back again, with the steering lock engaging and releasing as it should. The locksmith walks through this with you, the engine started and shut off more than once, so you see for yourself that the barrel is answering the key properly and consistently before anyone drives away from the property.

In the van

  • Trim clips and fasteners
  • Broken key extractors
  • Keyed-alike pinning kit
  • Pick and tension tools
  • Plug follower

What affects the quote

  1. 1

    Keying other locks to match

    Bringing the doors and trunk onto a newly pinned ignition key, so one key runs the whole vehicle again, is separate work from the ignition repair itself, even when it happens during the same visit.

  2. 2

    Vehicle make, model and column design

    How the ignition assembly is built varies by vehicle, a simple housing reached with a few steps, or a column locked down with shear bolts and trim that has to come off carefully. That difference in access shapes how much time the repair takes.

  3. 3

    A key broken off inside the barrel

    Extracting a snapped key fragment adds its own step before any other work can begin, and the cylinder is then checked for the wear that likely caused the break in the first place.

Same fees day, night or weekend.

Have it ready

Before you call · 0 / 3

(249) 800-5180

Ignition Lock Repair: questions

Advice · (249) 800-5180

My key is stuck in the ignition and won't come out. Is that a problem?

It is mostly inconvenient rather than urgent, though it is worth having looked at soon since a stuck key often means a wafer or the steering-lock mechanism is not releasing the way it should. Forcing it risks snapping the key or damaging the barrel further, so the safer route is to leave it be and have the mechanism assessed and freed properly.

Can a key that snapped off inside the ignition be removed without damaging anything?

In most cases, yes. Hooked and spiral extraction tools reach in and draw the broken piece out along the path it entered, rather than pushing it further in. Once it is clear, the cylinder is checked for the wear that likely caused the break in the first place, and a fresh key is cut to replace both broken pieces before the vehicle is handed back to you.

Will the same key still open my doors and trunk after this repair?

If the doors and trunk already shared a key with the ignition, that arrangement is kept in mind throughout the repair and preserved wherever the vehicle's hardware allows it. Where a new cylinder or new pinning is involved, the other locks are tested against the new key before the visit ends, so nothing is left running on two different keys by accident.

Simcoe, Ontario

Barrie information

Town
Barrie, Simcoe, Ontario
In business
18 years
Hours
Open 24/7 · nights, weekends and holidays, same fees
Visits
On-site assessment preferred. Request a visit or call.

What the census means at the door

29%

Newer homes. About 29% of homes in Barrie were built in 1980 or earlier, according to the 2021 Census.

Households in newer homes are often keen on keypads, fobs and phone-controlled locks. Standard doors make installation straightforward, and the locksmith spends more of the visit setting codes and pairing devices than on carpentry.

58%

A mix of homes. Single-detached houses make up about 58% of homes in Barrie (2021 Census).

In a mixed area, a locksmith's advice bends to the building. For a house, the side door and garage entry get attention. For an apartment, the suite door's closer, strike and viewer do. The principle is the same: look at how the door is actually used.

Source: Statistics Canada, 2021 Census of Population

Open Barrie in Google Maps

Open 24/7

Request a visit

Turning the key used to take one smooth motion.

Call now · open 24/7(249) 800-5180
  • On-site assessment preferred
  • Same fees day, night or weekend
  • 18 years in business